Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in Upland, CA | True Blue Locksmith
We provide independent Kwikset locksmith service across Upland, CA, from the Route 66 corridor up through the 91784 foothills. What makes our Kwikset work different here is simple: we understand how this city’s split housing stock and hot, dry Inland Empire climate affect specific Kwikset hardware in ways a generic locksmith misses. We diagnose the actual lock before recommending any repair or replacement. Call (877) 358-5506 for a straight answer and an honest quote.
True Blue Locksmith isn’t authorized, sponsored, or warranty-endorsed by Kwikset, and we don’t pretend otherwise. What we are is a shop that handles Kwikset hardware every week across all three Upland ZIP codes. From a SmartCode 914 deadbolt that stopped throwing on a west-facing door off Euclid Avenue to a gritty SmartKey cylinder in a 91786 rental turnover, we know the failure patterns before we arrive. If you’re looking for Kwikset sales & service from a team that works on these locks daily, you’ve found the right page.
Why Upland Residents Choose Us for Kwikset Service
Kwikset dominates Upland’s builder-grade tract homes, rental turnovers, and mid-century ranchers in equal measure. That means our techs see the same model lines repeatedly: SmartCode 913 and 914 electronic deadbolts, 980 and 660 single-cylinder deadbolts, SmartKey entry knobs in Tylo, Hancock, and Cove styles, and plenty of 780-series and older builder-grade knob locksets from the 1970s through the 1990s. Familiarity at that level changes how we diagnose.
Noel Carrasco, our owner and lead locksmith, picked up the trade at Cerritos College and has been working locks in southeast LA County for going on two decades. He built True Blue on a straightforward principle: tell the customer what the lock needs and what it doesn’t. That means if your Kwikset deadbolt just needs an OEM strike replacement and a jamb adjustment, that’s what we recommend, not a $400 swap you didn’t ask for.
We’re also what we call a full-spectrum shop. We work on everything from consumer-grade Kwikset and Yale to commercial Medeco, Mul-T-Lock, Abloy, and Sargent, and we also provide Kwikset service in Claremont. That breadth matters when a Upland homeowner has a Kwikset on the front door and something high-security on a workshop or home office. One call covers both.
Styles & brands we work with







Common Kwikset Locksmith Problems We Solve in Upland
- SmartCode 913 deadbolts that throw halfway and stop. This is almost always a binding motor and gearset inside the interior assembly. We see it most on west-facing and south-facing doors in Upland, where the sun has baked the housing for years and the internal plastic has warped. The keypad goes dead, the bolt stalls, and the lock won’t respond to the programming buttons. In many cases a new OEM interior assembly restores full function for less than a full replacement.
- SmartKey cylinders that get gritty and balky. Santa Ana winds push fine dust into exterior keyways across the Inland Empire, and Kwikset’s SmartKey side-locking mechanism is particularly sensitive to that debris. The rekey pins drag, the key sticks partway in, or the cylinder won’t accept the rekey tool. We clean and lubricate the cylinder with the proper products, then rekey it with genuine Kwikset OEM pins.
- 980 and 660 deadbolts seizing in summer. The heat swings in Upland are hard on door jambs. Wood expands and warps, the strike plate shifts a few millimeters, and the deadbolt no longer lines up. The lock feels broken, but it’s usually a misaligned strike or a swollen jamb. We re-square the strike, reinforce it where needed, and get the bolt throwing cleanly again.
- Older Kwikset knob locksets loosening on stucco doors. Those 1970s through 1990s foothill homes in 91784 and the ranchers down the hill often still have their original builder-grade knob locks. Years of the dry Upland climate have stripped the mounting screws or cracked the wood behind the rose. The knob wobbles, the cylinder spins, and eventually the whole thing stops retracting the latch. We restore or replace the mounting hardware and get the lock solid again.
- SmartKey knobs bolted over old mortise preps in downtown bungalows. This one is uniquely Upland. We’ll get into it below, but the short version is that a modern Kwikset retrofitted onto a 1930s-1950s door needs different handling than a factory-fresh install. We service the whole door, not just the lock.
Kwikset Service in Upland: What Local Conditions Mean for Your Equipment
Here’s the thing most locksmiths won’t tell you, because they haven’t worked enough doors in this city to notice the pattern. Downtown and Route 66-adjacent Upland still holds a lot of 1920s through 1950s citrus-boom bungalows and ranchers with their original mortise locks and skeleton keys. Many of those same homes have had a Kwikset SmartKey knob or lever bolted onto the front door over or beside the old mortise prep. That retrofit changes the geometry of the door. The modern latch doesn’t seat the same way it would in a clean 2-1/8 inch cross bore, the door slab shifts differently, and the old mortise pocket behind the new hardware can let the lock plate flex. When we rekey or repair a Kwikset on one of these doors, we’re fitting it to a door with a century of history, not a blank slab in a new build. On a 1950s bungalow off Euclid Avenue near downtown, the front door had a Kwikset SmartKey knob bolted over an old mortise-lock prep, and the heat-warped jamb had the 660 deadbolt dragging on its strike. We re-squared and reinforced the strike, rekeyed the SmartKey cylinder with OEM pins, and adjusted the knob’s latch so both locks threw cleanly, then serviced the vintage mortise on the back door that the last company wouldn’t touch. That’s the job. Honest work, solid locks. That’s the whole job.
Kwikset Models & Products We Service in Upland
We work on the full Kwikset consumer line, including the SmartCode 913 and 914 electronic deadbolts, the 980 and 660 single-cylinder deadbolts, SmartKey entry knobs and levers in Tylo, Hancock, and Cove styles, and the older 780-series and builder-grade knob locksets from the 1970s through the 1990s. Our parts approach is deliberate: genuine Kwikset OEM cylinders, SmartKey rekey kits, and strike hardware where the lock is worth keeping, and quality aftermarket strikes or reinforcement plates only where OEM won’t solve a jamb problem. On a corroded or electronically dead SmartCode, we tell you plainly whether a new OEM interior assembly is cheaper than a full replacement, and when a 25-year-old knob lock has earned retirement. We keep common Upland repair parts on the truck, which cuts turnaround time on most calls across the 91784, 91785, and 91786 ZIP codes.
Kwikset Service Pricing in Upland
Pricing for Kwikset work in Upland runs on honest, itemized quotes built on what your specific lock needs. A standard Kwikset SmartKey rekey typically falls between $25 and $45 per cylinder depending on the number of locks and whether we’re rekeying them all to a single key. Deadbolt installation runs roughly $95 to $185 for labor, plus the cost of the Kwikset hardware you choose. Smart lock installation is $120 to $225 depending on the model and door prep. A service call to diagnose a seized SmartCode or misaligned deadbolt is $65, which is credited toward any repair we complete on that visit.
What drives the final number is the condition of the lock and the door. A clean rekey on a well-maintained 660 costs less than a SmartCode repair where the motor assembly is destroyed and the strike needs re-squaring. You’ll get the full price quoted on the phone before we dispatch, and that price is the one on your invoice. There’s no call-out surcharge added on arrival. Call (877) 358-5506 for an exact quote. Estimates are free.
Serving Upland, CA — Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in Upland
Yes, we rekey Kwikset SmartKey locks in Upland without replacing the cylinder. The SmartKey design lets us rekey the lock using the original cylinder and a new set of keys, provided the cylinder mechanism isn’t damaged or packed with debris. We use genuine Kwikset OEM rekey kits and will tell you if the cylinder is too far gone to rekey cleanly. Call (877) 358-5506 and we’ll walk you through what your lock needs.
In our experience in Upland it’s usually both, but the lock takes the blame first. Years of afternoon sun on a west-facing door bake the SmartCode 913 or 914’s interior motor and gearset, which binds and stalls the bolt. At the same time, the heat warps the wooden jamb so the bolt no longer aligns with the strike plate. We diagnose both, replace the interior assembly if it’s failed, and re-square the strike so the bolt throws cleanly. Call (877) 358-5506 for an honest diagnosis.
We service both. The downtown and Route 66-adjacent bungalows in Upland still hold original mortise locks and skeleton keys that most big-box techs decline, and we work on that vintage hardware regularly. We also handle the modern Kwikset hardware that’s often been retrofitted onto those same doors, plus Kwikset repair in Montclair when needed. Being fluent in both is part of what makes us useful here. Call (877) 358-5506 and tell us what you’re dealing with.
Two answers, both specific to Upland. Late summer heat dries out the internal lubrication in your Kwikset cylinder and can warp the door jamb enough to bind the latch or bolt. Santa Ana winds then push fine, abrasive dust into the exposed keyway, which grinds against the pins and the key. The fix is a proper cleaning, lubrication with the right product, and sometimes a rekey with fresh OEM pins. Call (877) 358-5506 to get it sorted before the key snaps in the cylinder.
It depends on what’s wrong with it, and we’ll tell you straight. If the mounting screws have stripped or the rose is loose, that’s a simple hardware fix and the lock is usually worth keeping. If the internal mechanism is worn out or the cylinder spins, replacement typically makes more sense than repairing a 25-year-old lock that’s already past its service life. Call (877) 358-5506 and we’ll give you an honest recommendation either way.
Service Areas Near Upland
We serve Upland and the surrounding Inland Empire communities. If you’re in the Upland service area or nearby, you’ll get the same straight pricing and Kwikset expertise. We also provide Kwikset service in Riverside and Kwikset service in Huntington Park for customers in those areas who need the same independent, honest lock work.
Book Your Kwikset Service in Upland Today
If your Kwikset lock is acting up in Upland, or you just bought a place and want the locks rekeyed before you move in, call (877) 358-5506. We’ll give you a straight quote on the phone, and same-day service is available for most Kwikset repairs and rekeys across 91784, 91785, and 91786, as well as Rancho Cucamonga Kwikset service.
Written by Noel Carrasco, Owner at True Blue Locksmith, serving Upland since the early 2000s.