Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateKwikset Locksmith in Corona, CA | True Blue Locksmith
We provide independent Kwikset locksmith service across Corona, from rekeys and deadbolt swaps to SmartCode keypad diagnosis. For car key issues, see our Corona Car Key Replacement service. The one thing that makes our Kwikset work here different: we know how this city’s tract-home buildout and foothill dust actually wear down Kwikset hardware, not just how to swap a cylinder. If you’re in 92877, 92878, 92879, or 92880 and your Kwikset knob, deadbolt, or keypad is giving you trouble, call (877) 358-5506 and we’ll give you a straight answer.
We’re an independent locksmith. We are not authorized, sponsored, or endorsed by Kwikset. What we are is a team that works on Kwikset hardware every week in this city, from builder-grade Tylo knobs to 980-series deadbolts and SmartCode keypad sets. That’s the expertise that matters when your lock stops working at 6 a.m. and you need to get to the 91.
Why Corona Residents Choose Us for Kwikset Service
Most locksmiths can cut a KW1 key. Far fewer can tell you why your SmartCode 913 keypad failed after three Inland Empire summers, or why your builder-installed 660 deadbolt seized up the week the Santa Ana winds kicked in. We can. We work on Kwikset hardware daily, which means we carry the cylinders, latches, and keypads that get you sorted without a second appointment.
Noel Carrasco leads our bench. He picked up the trade at Cerritos College’s vocational program and has worked locks in southeast LA County for going on two decades, so he’s seen the full cycle of Kwikset hardware: the Tylo knobs that wore out in five years, the Passo deadbolts that survived fifteen, and the SmartCode keypads that baked in direct sun over a driveway off Green River Road. He brings that field experience to every Corona job we take.
When you call us, you get a licensed, insured locksmith who knows the difference between a worn KW1 cylinder and a misaligned strike plate; often the fix is five minutes and a few pins, not a new lock. We’d rather tell you that than sell you hardware you don’t need.
Styles & brands we work with







Common Kwikset Locksmith Problems We Solve in Corona
- Keys that stick, hang, or barely turn. Corona’s foothill dust and construction grit work into Kwikset KW1 cylinders fast, especially in the 92880 east-side tracts where grading and buildout never really stopped. Pins wear, keys get sticky, and within a few years of a new build the lock feels like it’s chewing on your key. We clean, repin, or replace the cylinder depending on how far the wear has gone.
- Deadbolts that seize in triple-digit heat. Summer in Corona bakes exterior Kwikset deadbolts and the wood doors they’re mounted in. The bolt binds, the thumbturn won’t fully retract, and you’re standing outside your own front door at 5:30 a.m. before a Riverside commute. We repair the bolt throw and, just as often, correct the strike plate that shifted when the door swelled.
- A “new” home key that opens a neighbor’s door. Production builders off the I-15 and 91 reused a small number of Kwikset keyways across entire tracts. That means a house in Horsethief Canyon or Sierra Del Oro can share a lock key with the house three doors down until someone rekeys it. Post-move-in rekeys are a near-universal Corona ritual, and we do them fast.
- SmartCode 913/915 keypad failure. Dust and direct sun do a number on SmartCode keypads and motors out here. The keypad goes unresponsive, the bolt sticks mid-throw, or the motor hums but doesn’t move. We stock genuine Kwikset SmartCode keypads and can usually get a failed unit working the same day without replacing the whole lock.
- Winter rain swelling doors until the latch jams. Corona winters aren’t dramatic, but when the rains come, wood and fiberglass doors absorb moisture and the Kwikset latch no longer lines up with the strike. A door that closed fine in October won’t latch in January. We rehang the strike, shim the hinges, and get the deadbolt throwing clean again.
Kwikset Service in Corona: What Local Conditions Mean for Your Equipment
Here’s what nobody tells you about buying a home in Corona: the same master-planned buildout that gave us Sierra Del Oro, Horsethief Canyon, and the 92880 east side also gave thousands of homes nearly identical builder-grade Kwikset hardware. If you’re in a neighboring community, we also offer Kwikset service in Eastvale. Production builders reused a small number of KW1 keyways across entire tracts. Not per street; per development. We saw it last month when a family closing on a Horsethief Canyon house called us because their “new” front-door key also worked in a neighbor’s Kwikset Tylo knob. That’s not a rare fluke; that’s a known pattern in this city’s 2000s tracts. We rekeyed both the knob and the 660 deadbolt to a fresh KW1 key and corrected a strike plate that had shifted in the summer heat. If you just closed on a house in Corona and haven’t rekeyed yet, assume someone else’s key still works your front door until we’ve proven otherwise.
Pair that with the local climate, hot dry summers and Santa Ana events that bake exterior hardware, followed by winter rains that swell doors and shift strike plates, and you have a city where Kwikset locks fail in predictable, fixable ways. Dust off the foothills accelerates cylinder wear. Heat warps doors. Rain jams latches. We see all of it, and we know which fix is the five-minute one and which means it’s time to replace the cylinder body.
Kwikset Models & Products We Service in Corona
We work on the full spread of Kwikset hardware common in Corona homes:
- Tylo and Passo builder-grade knob-and-deadbolt combos; the workhorses in 1970s-90s tracts and 2000s master-planned builds.
- Kwikset 660 and 665 single-cylinder deadbolts; simple, solid, and repairable.
- SmartCode 913 and 915 keypad deadbolts; the two we see most often in Corona, both prone to heat and dust wear.
- KW1/KW9-keyed entry sets and Weiser-compatible cylinders; the KW1 keyway is everywhere here, and we carry genuine replacement cylinders, latches, and strike hardware for fast turnarounds.
On SmartCode units, we use genuine Kwikset keypads and motors rather than aftermarket substitutes; on solid builder knobs and deadbolts, we repair and rekey rather than upsell. We recommend replacement only when the cylinder body or keypad is genuinely worn out. If your lock is tired but sound, we’ll tell you that and leave it working.
For a full picture of our Kwikset sales & service capabilities, including rekeys, deadbolt installs, and smart-lock work, that page covers the brand in detail.
Kwikset Service Pricing in Corona
Kwikset rekeying in Corona generally runs $65 to $130 for the first lock and $15 to $30 per additional lock keyed alike, depending on cylinder condition and how many KW1 cylinders we’re repinning. Deadbolt installation runs $95 to $220 plus parts for a single-cylinder unit. SmartCode keypad replacement runs $130 to $260 installed, depending on the model and whether the motor or just the keypad has failed. If the cylinder body is worn past repair, a full Kwikset entry knob or deadbolt replacement falls between $60 and $180 for the hardware, with labor quoted on the phone.
What drives the cost in Corona specifically? Dust and heat wear. A KW1 cylinder that’s five years old and full of foothill grit takes longer to clean and repin than a fresh one, and a door that’s swelled in the summer sun may need strike-plate work before the new deadbolt throws clean. We quote the full price on the phone before anyone is dispatched, and that’s the price on the invoice; no surprise add-ons when we arrive, no call-out surcharge stacked on top. Call (877) 358-5506 for a free estimate on your specific lock.
Serving Corona, CA — Our Local Coverage Area
We’re based in the Corona area and know this community well, and we also provide Kwikset service in Norco. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Kwikset Locksmith in Corona
It happens because production builders in Corona’s 2000s tracts, especially off the I-15 and 91, reused a small number of Kwikset keyways across entire developments. Your home and a neighbor three doors down may both have been keyed to the same KW1 pattern at the factory. The fix is a rekey; we generate a fresh key combination for your locks so the old builder pattern no longer works. Call (877) 358-5506 and we’ll schedule a rekey before anyone else’s key finds your door.
Yes. Most SmartCode 913 and 915 failures we see in Corona are keypad or motor failures from sun exposure and dust intrusion, and both are replaceable. We carry genuine Kwikset SmartCode keypads and motors, so we can often repair the unit on the spot rather than selling you a whole new lock. The exact fix depends on whether the keypad is dead, the motor has seized, or the bolt is stuck mid-throw. Call (877) 358-5506 for an honest quote on repair versus replacement.
Corona’s seasonal swings do it. Triple-digit summer heat and Santa Ana winds bake the door slab and deadbolt until the bolt binds in the frame, then winter rain swells the door and shifts the strike plate so the latch jams. Most of the time the lock itself is fine; the issue is door alignment and strike position. We adjust the strike, shim the hinges, and get the deadbolt throwing clean, which usually beats replacing a perfectly good Kwikset 660.
We rekey first. Solid builder-grade Kwikset knobs and deadbolts; Tylo, Passo, 660, 665; are repairable in the majority of cases, and a rekey is faster and cheaper than new hardware. We recommend replacement only when the cylinder body is worn out, the keypad has failed beyond repair, or you want to upgrade to a SmartCode unit. If your lock is sound, we’ll say so and rekey it. If it’s not, we’ll show you why before we recommend anything.
Yes. Older 1970s-90s tract homes near the 91 and 2000s master-planned builds in 92880 generally have standard Kwikset or Weiser-compatible bores, so a SmartCode 913 or 915 drops onto the existing door with minimal modification. We’ll check the bore spacing, door thickness, and current strike alignment, then install and program the keypad so it throws clean on the first try. Call (877) 358-5506 for a quick assessment and a flat install quote.
Service Areas Near Corona
We cover all of Corona, including 92877, 92878, 92879, and 92880. For readers one freeway exit over, we also serve our full Corona service area plus Kwikset service in El Cerrito Corona and Kwikset service in La Habra Heights. If you’re close enough to see the Santa Ana Mountains from your driveway, chances are we’re close enough to get there quickly.
Book Your Kwikset Service in Corona Today
If your Kwikset lock is sticking, failing, or still using the builder’s key, call (877) 358-5506. We’ll give you a straight answer, an honest price, and same-day service where the schedule allows. Honest work, solid locks; that’s the whole job.
Written by Noel Carrasco, Owner at True Blue Locksmith, serving Corona since 2006.