Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Murrieta Hot Springs, CA | True Blue Locksmith
We provide independent Medeco service in Murrieta and across Murrieta Hot Springs, from rekeying restricted-keyway cylinders to installing Maxum deadbolts on newer tract homes. What makes our Medeco work different here: we’re familiar with the split between older resort-era mortise preps near the historic hot springs and builder-grade hardware on the larger-lot properties east of Murrieta, and we stock the OEM cylinders and pins to match that reality. Call (877) 358-5506 and we’ll tell you straight what your Medeco lock needs and what it’ll cost before we ever dispatch a van.
We’re an independent Medeco service provider, not a factory-authorized dealer. Our credibility comes from years of hands-on work with Medeco’s rotating-pin and sidebar systems on real doors in real homes. And because Murrieta Hot Springs service area coverage is our home turf, we know what the heat, the Santa Anas, and the older wood doors here do to a high-security cylinder. Noel Carrasco, our owner, has been working locks in southeast LA County and the Inland Empire for going on two decades, and he trained at Cerritos College’s vocational program before building True Blue Locksmith around one idea: tell people the truth about their locks and charge what you quoted. That’s the whole job.
Why Murrieta Hot Springs Residents Choose Us for Medeco Service
Medeco locks are a different animal from the Kwikset or Schlage deadbolt most Murrieta Hot Springs homes get from the builder. The keys have angled cuts that rotate pins inside the cylinder, and a sidebar that has to line up perfectly before the plug will turn. When a locksmith doesn’t know Medeco’s geometry, every attempt to rekey or repair becomes a guessing game. We’re not guessing. Our techs work from OEM pin kits and Medeco’s keyway specifications, so a rekey comes out factory-correct the first time, not close enough.
Being local to Murrieta Hot Springs matters here too. A Medeco deadbolt on a 1980s mortise door near the old resort behaves differently than the same deadbolt on a 2015 tract home in the hills. Door prep, frame alignment, and what’s already been done to the lock before we arrive all shape the fix. We’ve seen the same Story: a homeowner buys a Medeco lock online, installs it on an older door that’s not square anymore, and the key binds within a season. We sort that out. And we’re one call for the whole property, including the gate and outbuilding locks that acreage owners in 92563 deal with, plus Medeco service in Wildomar if you’re on the county line.
Noel built our Medeco sales & service bench on this principle: use genuine Medeco cylinders, pins, and keys where the restricted keyway demands it, and tell you plainly when a worn cylinder is better replaced than rebuilt. You’ll get an honest answer on the phone, and the price we quote is the price on the invoice.
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in Murrieta Hot Springs
Here’s what we actually see on Medeco hardware across Murrieta Hot Springs, not the generic list of services on some template page.
- Hard-turning keys from rotating-pin and sidebar wear. Medeco’s claim to fame is the rotating pin design, but after years of use those pins and the sidebar develop flat spots. Keys start feeling gritty, then stick, then refuse to release. On older resort-era Medeco cylinders still in service near the hot springs, we rebuild or replace the guts and cut fresh keys to restore factory action.
- Sun-baked deadbolts and corroded collars. Inland Riverside County summers sit on exterior hardware hard, and Santa Ana winds push fine grit into every seam. Collars pit, bolts corrode, and Medeco keys that cut on one door fight another. We service the cylinder, replace collar and bolt components where needed, and adjust tension so the key turns clean again.
- Deadbolt misalignment from door swelling. Older wood doors in Murrieta Hot Springs, especially on mid-century and resort-era homes, swell in the heat and shift in the frame. A Medeco Maxum deadbolt with tight factory tolerances won’t seat a bolt against a shifted strike. We realign the strike plate, trim or shim where needed, and get the bolt throwing fully without forcing the key.
- Lost or unknown restricted key control. Homeowners move into a Murrieta Hot Springs property and find Medeco keys but no key card, or they lose the card and don’t know how to get duplicates. Restricted keyways require proof of ownership through the original system. We walk owners through what’s possible, rekey where authorization exists, and explain the key-control rules honestly instead of cutting blanks that won’t work.
- Mismatched keyways across a house and outbuildings. On the larger-lot and semi-rural properties east of Murrieta, Medeco locks get installed piecemeal over the years. The front door is M3, the shed is a Biaxial, and the gate is a builder-grade Kwikset. We rekey everything to one Medeco restricted keyway where the hardware supports it, so one key covers the whole property.
Medeco Service in Murrieta Hot Springs: What Local Conditions Mean for Your Equipment
Murrieta Hot Springs isn’t a standard suburban grid. It’s an unincorporated resort community in the 92563 zip code, with historic hot-springs-era buildings sitting alongside 1990s and 2010s tract homes and semi-custom places on acreage east of Murrieta proper. That split shows up in Medeco locksmith work here in a specific way: we’re not just rekeying a front door. We’re matching a high-security cylinder to an older mortise prep on a 1960s door near the old springs, or extending one restricted key across a house, a side gate, and a detached shed on a two-acre parcel — the kind of Quail Valley Medeco service we also handle nearby.
For Medeco owners, that means the job is rarely a simple cylinder swap. An older mortise door needs the cylinder flange and tailpiece fitted properly or the deadbolt binds no matter how good the key is. A newer home with builder-grade Weiser or Kwikset hardware getting a Medeco Maxum upgrade needs the bore holes checked, the strike reinforced, and the keyway matched to whatever the neighbor’s house already uses if the owner wants to share keys. And the heat here bakes exterior doors hard, so any new Medeco install has to account for seasonal movement from the outset, not after the first 100-degree week.
On a larger-lot property off the rural edge east of Medeco in Temecula territory, a homeowner wanted one Medeco restricted key to cover the house, a side-entry door, and a detached shed. We found the front door’s Medeco Maxum deadbolt binding because the wood door had swelled in the summer heat, so we realigned the strike, serviced the cylinder, and rekeyed the shed and side door to the same restricted keyway. One key, all three locks, and the owner kept control of the key card. That’s the kind of call that shows up here more than in a tightly packed tract subdivision, and it’s work we do regularly.
Medeco Models & Products We Service in Murrieta Hot Springs
We service the full Medeco lineup that shows up on Murrieta Hot Springs doors. That includes the Medeco Maxum residential deadbolt, the M3 deadbolt and knob sets with the M3+ keyway, the Original Biaxial deadbolt and mortise cylinders still in service on older doors near the historic springs, and Maxum and M3 keyed entry handlesets on newer semi-custom homes. Our parts approach is simple: genuine Medeco OEM cylinders, pins, and keys where the restricted keyway and key-control system demand them, and quality aftermarket components only for non-critical hardware like collars and trim. We keep OEM pin kits and key blanks stocked for fast turnaround across Murrieta Hot Springs, so a rekey doesn’t stall waiting on a mail-order part.
Medeco Service Pricing in Murrieta Hot Springs
Medeco work here generally runs in line with high-security hardware service across Riverside County. A cylinder rebuild or rekey with new Medeco keys typically falls in the $35 to $60 range per cylinder, full Medeco Maxum deadbolt installation runs about $160 to $220 per lock including hardware, and high-security key duplication sits around $8 to $15 per key when key control permits. What actually drives cost in Murrieta Hot Springs is condition and access: a worn Biaxial cylinder on an old mortise door takes more bench time than a clean M3 rekey, and jobs on gated or acreage properties add a little travel. You’ll get a free, no-commitment estimate by phone that covers the specific lock and the specific problem. Call (877) 358-5506 for an exact quote, and that quote is the price you’ll see on the invoice.
Serving Murrieta Hot Springs, CA — Our Local Coverage Area
We’re based in the Murrieta Hot Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Murrieta Hot Springs
No, and we don’t pretend to be. True Blue Locksmith is an independent Medeco service provider. We work on Medeco hardware using genuine OEM cylinders, pins, and keys, and we handle restricted-keyway and key-control work on its own terms, but we are not affiliated with or authorized by Medeco. What that means for you in Murrieta Hot Springs is a straight answer about your lock without a corporate script behind it.
Genuine Medeco OEM cylinders, pins, and keys where the restricted keyway and key-control system demand it. For non-critical components like collars, trims, and strike plates, quality aftermarket parts work fine and save you money without affecting security. We tell you which is which before any work starts.
Most single-cylinder rekeys and repairs are done in under an hour once we’re on site. Multi-lock properties, especially acreage homes where we’re keying a house, gate, and outbuildings together, take longer. We’ll give you a time estimate on the phone when we quote the job. Call (877) 358-5506 and we’ll tell you what your specific job involves.
We service Medeco Maxum deadbolts, M3 deadbolts and knob sets with the M3+ keyway, Biaxial Original deadbolts and mortise cylinders, and the Maxum and M3 keyed entry handlesets. If you have a Medeco cylinder on an older mortise door near the hot springs or a newer Maxum on a tract home in the hills, we work on it.
Rekey with new Medeco keys runs roughly $35 to $60 per cylinder, a Maxum deadbolt installation costs about $160 to $220 per lock including hardware, and high-security key duplication is around $8 to $15 per key when key control allows. The exact price depends on your lock’s condition and how many cylinders we’re working on. Call (877) 358-5506 for a free estimate, and what we quote on the phone is what you pay. No call-out surcharge added when we arrive.
Service Areas Near Murrieta Hot Springs
We serve Murrieta Hot Springs and the surrounding Inland Empire communities. If you’re in a nearby city and need Medeco expertise, we cover Medeco service in Rialto and Medeco service in Nuevo as well. Wherever you are, the same approach applies: honest quote on the phone, genuine Medeco parts where it counts, and work done right.
Book Your Medeco Service in Murrieta Hot Springs Today
Your Medeco lock isn’t something to leave limping. Call (877) 358-5506 for a free estimate on rekeying, repair, or new installation. We’ll give you a straight answer about what it needs and what it costs before anyone shows up, and we can usually get to Murrieta Hot Springs same day.
Written by Noel Carrasco, Owner at True Blue Locksmith, serving Murrieta Hot Springs since 2006.